T-bar handles for cabinets, cupboards and drawers
T-bar handles take their name from the T-shaped form seen from the front or side. In this collection, the phrase covers two related products: compact T-bar cabinet knobs with a crosspiece, and longer T-bar pull handles fixed at two points. That distinction is useful when shopping. A knob-style T-bar needs one position on the furniture front, while a pull-style handle is selected by its centre-to-centre hole measurement. This page is about those T-shaped cabinet fittings, not every straight bar handle and not large architectural door pulls.
The live collection currently contains 61 products. Named families include Amelia, Aurelia, Gantry, Kotata, Sienna, Vandon, Verna, Collier and Veselka. Amelia appears in both compact T-bar knob and longer cupboard-handle forms. Gantry, Kotata, Vandon and Verna include compact T-bar designs, while Aurelia, Sienna, Collier and Veselka include longer pulls. Read the full product title before choosing so that the format is clear.
Exact hole-centre measurements
The current pull-handle variants list 128mm, 160mm, 192mm, 224mm and 320mm hole centres across the collection. These are fixing-centre measurements, not overall handle lengths. Not every family is offered in every size: Aurelia, Amelia and Sienna list 128mm, 160mm, 224mm and 320mm options; Gantry and Collier also include 192mm on selected products; Vandon and Verna currently list 128mm, 160mm and 224mm; Veselka lists 128mm and 160mm. Use the selected product and variant as the final size reference.
For an existing two-hole handle, measure from the centre of one screw hole to the centre of the other. A measurement taken from the outside edges of the old handle will not identify the correct variant. Where you are fitting new furniture fronts, compare the chosen centre size with the width of the drawer or door and mark a single test position before drilling the remaining pieces.
Choosing the form and finish
Start with how you want the hardware to read on the furniture. A compact T-bar knob gives a small horizontal accent. A long T-bar pull creates a stronger line across a drawer or cupboard. Knurled versions such as Amelia, Aurelia and Sienna add visible surface texture, whereas other named families use simpler or more traditional shapes. Verified product finish names in the current membership include antique brass, antique copper, antique silver, black, gold, polished chrome and satin copper. Finish availability differs between families and variants.
- Choose knob-style or two-point pull-style T-bars before comparing sizes.
- For replacements, match the exact hole-centre measurement.
- For a coordinated run, compare products within the same named family.
- Check the individual product page for the complete dimensions of the selected variant.
A focused T-bar shopping collection
This collection is intended to help you compare products and select a variant. It should not be confused with a general guide to cabinet-handle history or with broad advice about all furniture fittings. If your project includes non-T-shaped handles as well, use the related kitchen, cabinet and cupboard collections to compare suitable alternatives without widening this page into door-pull hardware.
Begin with the furniture's existing drilling, narrow the range by T-bar format, and then compare family, size and finish. That order keeps the practical measurement decision ahead of appearance and makes it easier to repeat the same selection across several cabinet fronts.
Read less
